PLEASE READ ALL DETAILS BEFORE ORDERING
Current estimated build/ship time is 7-10 days from purchase date.
Kit Includes:
- 4 CNC cut control arm lowering strut mount tabs (2 for each side).
Specs:
- Fits both steel and aluminum factory lower control arms
- Approximately 1.5” - 2” drop
- Weld on and/or bolt on
Notes:
- Hardware is not included and will need to be obtained by the installer
- Professional installation is required as you will need to modify your lower control arm
- Steel Lower Control arms
- Require welding around bracket perimeter
- (8) 3/8" bolts and lock nuts
- Aluminum lower control arms
- Require tapping 3/4" threads in factory bolt hole
- (8) 3/8" bolts and lock nuts
- (4) 3/4" Short bolts (will need to be cut flush on inside to clear factory shock body)
IF YOU ARE UNFAMILIAR WITH HOW THESE BRACKETS MOUNT, EMAIL ME PRIOR TO PURCHASE FOR A MORE DETAILED EXPLANATION. DO NOT ORDER IF YOU ARE UNFAMILIAR WITH HOW TO PROPERLY INSTALL.
In some cases, minor modification is required to the aluminum style lower control arms. Grinding some material away (less than .5") to make clearance for bottom side of the strut spring seat. If you are running lowering springs or shorter/cut springs, this should not be an issue. You will still need hardware & spacers or washers for in between new strut tab and strut/coil over to match lower arm material thickness. It is a 5/8” through bolt strut mount and 3/8” auxiliary mounting bolts.